I have a STADRY cart bag and some 913 Woods (D2, 3W and 17deg Hybrid) the bag and clubs are about 18 months old, just before Christmas I noticed that the divider had worn through on the Driver slot. I have since inspected the clubs and noticed that all three clubs have worn shafts at the divider interface. In fact the Driver had two wear marks, one pre wear through and one post. As it was obvious a Titleist bag had caused the problem to Titleist clubs I thought it would be a no brainer that the Titleist would honour a faulty product and the resulting problems. Apparently not, they will replace the bag, however they will not replace the shafts as I had not pulled the sock on the head cover right down. I have spoken to them and explained that you cannot push the sock through the divider but apparently that is what I should have been doing (the design on my 816 head cover should be changed to allow this). My question is do you guys push the head cover socks through the dividers. Have a look at the photo and please let me have your observations and comments please. Personally I think that Matt finished shafts and an abrasive material for a divider are not good design and not of marketable quality.