Bending loft of the 718 MB

RE: Bending loft of the 718 MB

larry m — Wed, 06 Jan 2021 11:47:32 GMT

RE: Bending loft of the 718 MB

Dale V — Tue, 05 Jan 2021 18:40:40 GMT

Chances are he has already done it or maybe even on his next set since he asked the question 3 years ago.

RE: Bending loft of the 718 MB

William K — Tue, 05 Jan 2021 02:31:00 GMT

Did you know the Titleist 718MB irons are weaker than the industry standard?
For example, most standard PW lofts are 46°, whereas the 718MB PW is 47°.

Keep in mind, bending irons will effect the bounce of the club. That said, if you're sweeper (don't take a divots) than the bounce isn't going to effect you much, if at all.

RE: Bending loft of the 718 MB

JOSHUA M — Tue, 06 Mar 2018 13:03:14 GMT

P_Lamps, the only to find out is try them out side by side. I've heard that they are, I haven't hit the 718 T-MB.

Josh

RE: Bending loft of the 718 MB

19hole — Mon, 05 Mar 2018 21:13:08 GMT

It is interesting that you think that the current MB lofts are strong. If anything, I find that they are a little weak. Yes, as others have said you can bend them but I would look at sending them back to Titleist to have it done.

RE: Bending loft of the 718 MB

P_Lamps — Mon, 05 Mar 2018 20:33:52 GMT

Does anyone know if the TMb face "hotter" and will it get more distance against an AP2 when bent to the same loft?

RE: Bending loft of the 718 MB

Tim Tiger — Mon, 05 Mar 2018 16:07:26 GMT

You can custom order them to your specs or possibly send them back for a factory bent spec.

TT

RE: Bending loft of the 718 MB

JOSHUA M — Mon, 05 Mar 2018 15:35:40 GMT

you can have them bent up to 2 degrees in either direction. by bending them weaker you will increase the bounce and vice versa for bending them stronger. it's a 1 to 1 relationship by the way. hope this helps.

Josh