TS 1 Driver Setting

RE: TS 1 Driver Setting

Wendell M — Thu, 20 Aug 2020 21:55:32 GMT

So I just purchased a TS1 with 10.5 head and the Speeder 40 shaft. In addition to the hosel, can the weight in the club head be adjusted?

RE: TS 1 Driver Setting

Craig P — Fri, 31 Jan 2020 15:57:31 GMT

Thanks Dan O, I'm going to range and try the A,B,C,D 1 settings.

RE: TS 1 Driver Setting

Don O — Thu, 30 Jan 2020 17:27:19 GMT

Adding/decreasing loft definitely closes/opens (increasing/decreasing draw bias) the face relative to the prior setting. 11.75 degrees (-0.75 degrees) will be more open than the A1/12.5 degrees. Adding/decreasing lie will also compliment the face exposure bias in the same direction.

RE: TS 1 Driver Setting

Craig P — Thu, 30 Jan 2020 15:05:17 GMT

Titleist's TS 1 promo says that the club is manufactured with a slight draw bias. I will now try the A1 position, maybe that will compensate for the extra .5* loft and draw bias.

RE: TS 1 Driver Setting

Don O — Tue, 28 Jan 2020 03:08:55 GMT

The matrix is the same for all Sure-Fit hosel clubs. For RH, the base setting is A1. D4 adds 0.75 degrees of loft.

The other part of the fitting is the shaft. With the Fubiki shaft in the TS1, I'm getting a steeper shot with the 10.5 head than I got with the 12 degree TS2 with the Tensai Blue shaft. Being LH, my only option was the 10.5.

Like Chris, I don't know that the TS1 has a draw bias at the A1 position. It was promoted to gain 2-5 mph head speed for the additional distance. You can check to see if the A1 position is still 0.5 degrees open on all drivers since the 910,

RE: TS 1 Driver Setting

Chris92009 — Mon, 27 Jan 2020 17:50:40 GMT

I did not realize the TS1 has a draw bias out of the box...I would double check this with the Titleist Staff in California.